Loading...

DCC-12 House | Residential Splitter Box | EV Energy Management System

945.00 $ +tx

Only 1 left in stock

The DCC-12 is an electric vehicle charge controller specially designed to allow a charging station to be connected to an electrical panel that would otherwise not have sufficient capacity to allow connection. Unlike the DCC-9 and DCC-10, there is no circuit breaker inside the DCC-12 that intermediates between the charging station and the electrical panel.

Check the compatibility before choosing this product:

Spec Sheet
Installation Guide (english/french)

 

* Delivery times may vary depending on product availability

Only 1 left in stock

SKU: DCC-12 Category:

Description

The DCC-12 is an electric vehicle charge controller specially designed to allow a charging station to be connected to an electrical panel that would otherwise not have sufficient capacity to allow connection.

Functioning

  • Real-time reading of the energy consumption of the home electrical panel
  • Detects when the total energy consumption exceeds 80% of the capacity of the main circuit breaker and temporarily cuts off power to the charging station
  • Automatically replenishes the charging station when the total consumption of the electrical panel is less than 80% of its capacity for more than 15 minutes

Benefits

  • Avoids having to change an electrical panel that is at full capacity
  • Adds no additional load to the electrical panel thanks to energy management
  • NEMA 3R enclosure for indoor and outdoor installation
  • Can be installed on the wall or ceiling

Disadvantages

  • Adding a DCC does not increase the value of your home unlike a change in electrical panel

Included in the box

  • Charge controller
  • Power relay (Max 60A)
  • 2 current readers (CT)

Check the compatibility before choosing this product:

Spec Sheet

Installation Guide (english/french)

Additional information

Weight 9.4 lbs
Dimensions 12.75 × 9.5 × 7.5 in
Brand

Thermolec

Emplacement

Intérieur, Extérieur

Ampérage

30A, 40A, 50A, 60A

Dimensions

279,4mm x 203,2mm x 101,6mm (11.00 x 8.00 x 5.00 pouces)

Maker

Made by Thermolec

Reviews

There are no reviews yet.

Be the first to review “DCC-12 House | Residential Splitter Box | EV Energy Management System”

Your email address will not be published. Required fields are marked *

You may also like…

Quick Comparison

SettingsDCC-12 House | Residential Splitter Box | EV Energy Management System removeDCC-10 House | Residential Splitter Box | EV Energy Management System removeDCC-9 Condo | Multi-Unit Residential Splitter Box | EV Energy Management System removeEVduty Smart Current Sensor - 200 amp removeEVduty Smart Current Sensor - 1000 amp remove
Image
SKUDCC-12DCC-10DCC-9AEVCCS200AEVCCS1000
Rating
Price945.00 $ +tx1,145.00 $ +tx1,295.00 $1,395.00 $ +tx399.00 $499.00 $ +tx1,250.00 $ +tx
Add to cart

Add to cart

Select options

Select options

Select options

Select options

Additional information
Weight 9.4 lbs
Dimensions 12.75 × 9.5 × 7.5 in
Brand

Thermolec

Emplacement

Intérieur, Extérieur

Ampérage

30A, 40A, 50A, 60A

Dimensions

279,4mm x 203,2mm x 101,6mm (11.00 x 8.00 x 5.00 pouces)

Maker

Made by Thermolec

Brand

Thermolec

Emplacement

Intérieur, Extérieur

Ampérage

30A, 40A, 50A, 60A

Dimensions

DCC intérieur 279,4mm x 279,4mm x 101,6mm (11.00 x 11.00 x 4.50 pouces)

DCC Extérieur 355,6mm x 330,2mm x 203,2mm (14.00 x 13.00 x 8.00 pouces)

Maker

Made by Thermolec

Brand

Thermolec

Emplacement

Intérieur, Extérieur

Ampérage

30A, 40A, 50A, 60A

Dimensions

DCC intérieur 279,4mm x 279,4mm x 101,6mm (11.00 x 11.00 x 4.50 pouces)

DCC Extérieur 355,6mm x 330,2mm x 203,2mm (14.00 x 13.00 x 8.00 pouces)

Maker

Made by Thermolec

Brand

EVduty™

Maker

Made by Elmec Inc. in Shawinigan, Quebec, Canada

Phase

Single-phase, Three-phase

Brand

EVduty™

Maker

Made by Elmec Inc. in Shawinigan, Quebec, Canada

Phase

Single-phase, Three-phase

Go to Top