CHOM 100A or 125A (10KA) panel kit with smart current sensor and charging station

• 208-240VAC / 40 amps / 9.6 kW
• For indoor or outdoor installation (-40°C to 40°C)
• Output cable: 7.6 meters (25 feet)
• Limited warranty: 5 years (3 years on output cable and connector)
• Compatible with all plug-in vehicles (100% electric or plug-in hybrid) sold in North America
• Compliance with applicable CSA and UL standards CERTIFIED by LabTest Certification Inc., for ALL variants.

Intelligent functions via EVduty mobile app :

• WiFi connectivity
• Start/stop charging session
• View charging data in real time
• Create/add/modify a charging station
• Create/add/modify a private charging station
• Set maximum output current (8A, 12A, 16A, 20A, 24A, 28A, 30A,40A)
• Configure power sharing function
• Manage access to the private charging station by sending invitations
• View the history of charging sessions and other events that have occurred on a charging station

Smart-Pro revenue-generating functions:

• Manage access to private or public charging stations by sending invitations
• Create/add/modify a public charging station
• Generate revenue by applying a charging cost
• Modify the cost of recharging

User manual (French version)

The EVduty smart current sensor (only compatible with EVduty Smart charging stations) reads current consumption in real time and sends the information to one or more intelligent EVduty charging stations electrically connected to the same panel. The charger(s) can then adjust the recharging current.

Functions

• Real-time current reading
• WiFi and Ethernet communication
• Configuration by web page
• Real-time diagnostic system
• Use with one or more intelligent EVduty stations on the same panel

Specification

• MODEL: EVCCS200
• 100-240VAC | 50 / 60Hz
• Current sensors:
  Clamp-on transformer
  Opening diameter: 24.2mm (0.95 ")
  Dimensions: 69.6mm x 43.5mm (2.74 "x 1.71")
• Current reading range: 0 - 200 A
• Operating temperature: - 15 ° C to 40 ° C
• Dimensions: 108mm x 852mm x 31.8mm (4.25 "x 3.354" x 1.25 ")
• Manufactured by Elmec Inc. in Shawinigan, Quebec, Canada

Specs Sheet (in French)

User Guide (in French)

The panel kit is used to intercept a meter in a multi-residential situation. An EVduty current sensor and an EVduty charging station are required to allow this type of installation.

**Note that a 100A or 125A 22KA circuit breaker must be in place to use this type of panel**.

The CHOM panel kit contains:

1x Panel CHOM48L125GC

1x Circuit breaker 100A or 125A (10KA)

1x Quad 15-15-240 circuit breaker